+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2307 EKTN9: ⌀35 × ⌀80 × 31 mm⌀80⌀35312307 EKTN9
Fig. 1: 2307 EKTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2307 EKTN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2307 EKTN9

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 14 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
31 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
39.7 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 35 × 80 × 31 from other brands

15 products
Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm
You are viewingSKF 2307 EKTN9

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 23072307standard designCT35 × 80 × 31116 pcs€3.36Request a quote
  • Photo: 23072307standard designZ&S35 × 80 × 31available to order€15.19Request a quote
  • Series illustration (not a photo of this item): 23072307standard designKG35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 35 × 80 × 31 mm1607 DSDS: not decodedNICE35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 55NSK35 × 80 × 31available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2307 K C32307 K C3clearance C3, 1:12 tapered boreNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 KTNGTNG, 1:12 tapered boreNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 35 × 80 × 31 mm1607 (2307) PQPQ: not decodedNTE35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 EMdifferent cage, ESKF35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 ETN9different cage, ESKF35 × 80 × 31available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 80 × 31mm
Cdynamic 39.7kN

Self-aligning ball bearing 2307 K. Under GOST the same bearing is designated 111607.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 111607?

It is the same bearing under GOST 3189-89: 111607 corresponds to the ISO base 2307 K. Size 35 × 80 × 31 mm, a full equivalent of 2307 K.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet