+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
TMB
Drawing of NF 208: ⌀40 × ⌀80 × 18 mm⌀80⌀4018NF 208
Fig. 1: NF 208, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NF 208

Load: radial high; no axial loadCylindrical roller

Bearing TMB NF 208

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
7 exact, 39 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
18 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.385 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 40 × 80 × 18 from other brands

47 products
Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mm
You are viewingTMB NF 208

Size and design match across the brand catalogues. The codes in the number are read against the TMB catalogue.

  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208This bearingTMB40 × 80 × 18out of stockon requestyou are here
  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208 ECT40 × 80 × 183 pcs€2.51Request a quote
  • Photo: NF 208NF 208Z&S40 × 80 × 18available to order€8.73Request a quote
  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208CT40 × 80 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208 EKG40 × 80 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208 ENTE40 × 80 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208 EWBW40 × 80 × 18out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 80 × 18mm
mweight 0.385kg

Cylindrical roller bearing NF 208.

M: TMB data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 208 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet