+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NF 208 E: ⌀40 × ⌀80 × 18 mm⌀80⌀4018NF 208 E
Fig. 1: NF 208 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NF 208 E

Load: radial high; no axial loadCylindrical roller

Bearing CT NF 208 E

€2.51per piece
In stock: 3 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
4 exact, 39 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
18 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
43.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 40 × 80 × 18 from other brands

47 products
Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mm
You are viewingCT NF 208 E
€2.51baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208 EThis bearingCT40 × 80 × 183 pcs€2.51you are here
  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208 EKG40 × 80 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208 ENTE40 × 80 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 40 × 80 × 18 mmNF 208 EWBW40 × 80 × 18out of stockon requestRequest a quote

Under the price: the difference from the price of this bearing (€2.51).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 80 × 18mm
Cdynamic 43.8kN

Cylindrical roller bearing NF 208 E.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet