+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ 2309: ⌀45 × ⌀100 × 36 mm⌀100⌀4536NJ 2309
Fig. 1: NJ 2309, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 2309

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing STEYR NJ 2309

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
OEM number
45 RJ 23
Equivalents
4 exact, 11 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
36 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.33 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 100 × 36 from other brands

15 products
Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mm
You are viewingSTEYR NJ 2309

Size and design match across the brand catalogues. The codes in the number are read against the STEYR catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mmNJ 2309This bearingSTEYR45 × 100 × 36out of stockon requestyou are here
  • Photo: NJ 2309 E1MNJ 2309 E1MNEU45 × 100 × 36available to order€55.94Request a quote
  • Series illustration (not a photo of this item): NJ 2309 ENJ 2309 ECT45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mmNJ 2309 ECPSKF45 × 100 × 36available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 45 × 100 × 36mm
mweight 1.33kg

Cylindrical roller NJ bearing NJ 2309.

M: STEYR data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2309 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet