+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NU 207 ECP: ⌀35 × ⌀72 × 17 mm⌀72⌀3517NU 207 ECP
Fig. 1: NU 207 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 207 ECP

Load: radial high; no axial loadCylindrical roller NU

Bearing SKF NU 207 ECP

€25.14per piece
In stock: 5 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 33 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
17 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
56 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
48 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 35 × 72 × 17 from other brands

37 products
Photo: NU 207 ECP
You are viewingSKF NU 207 ECP
€25.14baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NJ, 35 × 72 × 17 mmNJ 207different designCT35 × 72 × 17300 pcs€1.87−€23.27Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 35 × 72 × 17 mmN 207different designCT35 × 72 × 1711 pcs€2.23−€22.91Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 35 × 72 × 17 mmN207J PQJ, PQ: not decodedNTE35 × 72 × 178 pcs€4.78−€20.36Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 35 × 72 × 17 mmNJ207J PQJ, PQ: not decodedNTE35 × 72 × 1748 pcs€4.78−€20.36Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 35 × 72 × 17 mmNU207J PQJ, PQ: not decodedNTE35 × 72 × 1728 pcs€4.78−€20.36Request a quote
  • Photo: NUP 207 ENUP 207 EEZ&S35 × 72 × 17available to order€8.21−€16.93Request a quote
  • Photo: NJ 207 ENJ 207 EEZ&S35 × 72 × 17available to order€8.48−€16.66Request a quote
  • Photo: NJ 207 ECPNJ 207 ECPdifferent designSKF35 × 72 × 17available to order€27.50+€2.36Request a quote
  • Photo: NJ 207NJ 207different designFKL35 × 72 × 17available to order€32.90+€7.76Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 35 × 72 × 17 mmN 207 MMCT35 × 72 × 17available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€25.14).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 72 × 17mm
Cdynamic 56kN
C0static 48kN

Cylindrical roller NU bearing NU 207 ECP.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 207 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet