+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 206 ECP: ⌀30 × ⌀62 × 16 mm⌀62⌀3016NJ 206 ECP
Fig. 1: NJ 206 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 206 ECP

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing SKF NJ 206 ECP

€24.58per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 30 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
44 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 30 × 62 × 16 from other brands

36 products
Photo: NJ 206 ECP
You are viewingSKF NJ 206 ECP
€24.58baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller N, 30 × 62 × 16 mmN 206different designCT30 × 62 × 1636 pcs€1.97−€22.61Request a quote
  • Cross-section drawing to size: Cylindrical roller NUP, 30 × 62 × 16 mmNUP 206different designCT30 × 62 × 166 pcs€2.10−€22.48Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 30 × 62 × 16 mmN206J PQJ, PQ: not decodedNTE30 × 62 × 1640 pcs€3.72−€20.86Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 30 × 62 × 16 mmNJ206J PQJ, PQ: not decodedNTE30 × 62 × 1648 pcs€3.72−€20.86Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 30 × 62 × 16 mmNU206J PQJ, PQ: not decodedNTE30 × 62 × 1648 pcs€3.72−€20.86Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 30 × 62 × 16 mmNU 206different designCT30 × 62 × 16available to order€1.93−€22.65Request a quote
  • Photo: NU 206 ENU 206 EEZ&S30 × 62 × 16available to order€6.55−€18.03Request a quote
  • Photo: N 206 EN 206 EEZ&S30 × 62 × 16available to order€7.61−€16.97Request a quote
  • Photo: NJ 206 ENJ 206 EEZ&S30 × 62 × 16available to order€7.61−€16.97Request a quote
  • Photo: NUP 206 EJPNUP 206 EJPE, P, J: not decodedZ&S30 × 62 × 16available to order€7.85−€16.73Request a quote

Under the price: the difference from the price of this bearing (€24.58).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 30 × 62 × 16mm
Cdynamic 44kN

Cylindrical roller NJ bearing NJ 206 ECP.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 206 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet