+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NUP 206: ⌀30 × ⌀62 × 16 mm⌀62⌀3016NUP 206
Fig. 1: NUP 206, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 206

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing CT NUP 206

€2.10per piece
In stock: 6 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
3 exact, 30 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
44 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
36.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.22 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 30 × 62 × 16 from other brands

36 products
Cross-section drawing to size: Cylindrical roller NUP, 30 × 62 × 16 mm
You are viewingCT NUP 206
€2.10baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NUP, 30 × 62 × 16 mmNUP 206This bearingCT30 × 62 × 166 pcs€2.10you are here
  • Cross-section drawing to size: Cylindrical roller NUP, 30 × 62 × 16 mmNUP206ET *5NSK30 × 62 × 16available to orderon requestRequest a quote
  • Photo: NUP 206 ENUP 206 EZ&S30 × 62 × 16out of stockon requestRequest a quote

Under the price: the difference from the price of this bearing (€2.10).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 30 × 62 × 16mm
Cdynamic 44kN
C0static 36.5kN
mweight 0.22kg

Cylindrical roller NUP bearing NUP 206.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 206 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet