+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 7205 BEP: ⌀25 × ⌀52 × 15 mm⌀52⌀25157205 BEP
Fig. 1: 7205 BEP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7205 BEP

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 7205 BEP

€13.16per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 20 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
C
14.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
9.3 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 25 × 52 × 15 from other brands

27 products
Photo: 7205 BEP
You are viewingSKF 7205 BEP
€13.16baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€13.16).
02

Details

what this bearing is, questions

About the bearing

D 52d 25B 15
d×D×Bsize 25 × 52 × 15mm
Cdynamic 14.8kN
C0static 9.3kN

Angular contact ball bearing 7205 BE.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet