+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 7205 C: ⌀25 × ⌀52 × 15 mm⌀52⌀25157205 C
Fig. 1: 7205 C, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7205 C

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing FKL 7205 C

€16.45per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
2 exact, 18 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
m
0.127 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 25 × 52 × 15 from other brands

27 products
Photo: 7205 C
You are viewingFKL 7205 C
€16.45baseline for the price comparison

Everything the number specifies matches: series 72, 25 × 52 × 15 mm, open, no protection, C, special design. The codes in the number are read against the FKL catalogue.

  • Photo: 7205 C7205 CThis bearingFKL25 × 52 × 15available to order€16.45you are here
  • Series illustration (not a photo of this item): 7205 C7205 CCT25 × 52 × 15available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€16.45).
02

Details

what this bearing is, questions

About the bearing

D 52d 25B 15
d×D×Bsize 25 × 52 × 15mm
mweight 0.127kg

Angular contact ball bearing 7205 C. Under GOST the same bearing is designated 36205.

M: FKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 36205?

It is the same bearing under GOST 3189-89: 36205 corresponds to the ISO base 7205 C. Size 25 × 52 × 15 mm, a full equivalent of 7205 C.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet