+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6002-2Z/C3WT: ⌀15 × ⌀32 × 9 mm6002-2Z/C3WT2Z
Fig. 1: 6002-2Z/C3WT, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6002-2Z/C3WT

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6002-2Z/C3WT

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 49 approximate
d
15 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
32 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
9 mm
Width BRing width. Source: supplier data
Seal
2Zmetal shields on both sides
Clearance
C3
C
5.85 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 15 × 32 × 9 from other brands

50 products
Drawing: 6002-2Z/C3WT
You are viewingSKF 6002-2Z/C3WT

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6002 2RS6002 2RScontact seals on both sides, normal clearance, standard designCT15 × 32 × 96,089 pcs€0.22Request a quote
  • Series illustration (not a photo of this item): 6002 2RS C36002 2RS C3contact seals on both sides, standard designCT15 × 32 × 950 pcs€0.30Request a quote
  • Series illustration (not a photo of this item): 6002 2RS6002 2RScontact seals on both sides, normal clearance, standard designNTE15 × 32 × 970 pcs€0.30Request a quote
  • Drawing: SS 6002 2RSSS 6002 2RScontact seals on both sides, normal clearance, stainless steelCT15 × 32 × 93,984 pcs€0.85Request a quote
  • Cross-section drawing to size: Deep groove ball, 15 × 32 × 9 mm6002-2NSE9contact seals on both sides, 9: not decodedNACHI15 × 32 × 9212 pcs€1.87Request a quote
  • Series illustration (not a photo of this item): 6002 2RSR6002 2RSRcontact seals on both sides, normal clearance, standard designFAG15 × 32 × 9259 pcs€2.09Request a quote
  • Series illustration (not a photo of this item): 6002 2RS6002 2RScontact seals on both sides, normal clearance, standard designKoyo15 × 32 × 9125 pcs€2.25Request a quote
  • Series illustration (not a photo of this item): 6002 2RS C36002 2RS C3contact seals on both sides, standard designKoyo15 × 32 × 960 pcs€2.25Request a quote
  • Photo: 6002-2RSH6002-2RSHcontact seals on both sides, normal clearance, standard designSKF15 × 32 × 93,255 pcs€2.46Request a quote
  • Photo: 6002 2RS6002 2RScontact seals on both sides, normal clearance, standard designKLT15 × 32 × 9available to order€0.29Request a quote
02

Details

what this bearing is, questions

About the bearing

D 32d 15B 9
d×D×Bsize 15 × 32 × 9mm
Cdynamic 5.85kN

Deep groove ball bearing 6002-ZZ C3, design 2Z: metal shields on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet