+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6000-RSH: ⌀10 × ⌀26 × 8 mm⌀26⌀1086000-RSHRSH
Fig. 1: 6000-RSH, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6000-RSH

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6000-RSH

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 43 approximate
d
10 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
26 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
8 mm
Width BRing width. Source: supplier data
Seal
RSHcontact seal on one side
Clearance
normal clearance
01

Equivalents

the same size 10 × 26 × 8 from other brands

45 products
Cross-section drawing to size: Deep groove ball, 10 × 26 × 8 mm
You are viewingSKF 6000-RSH

Everything the number specifies matches: series 60, 10 × 26 × 8 mm, contact seal on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Cross-section drawing to size: Deep groove ball, 10 × 26 × 8 mm6000-RSHThis bearingSKF10 × 26 × 8available to orderon requestyou are here
  • Cross-section drawing to size: Deep groove ball, 10 × 26 × 8 mm6000 RSCT10 × 26 × 8available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 26d 10B 8
d×D×Bsize 10 × 26 × 8mm

Deep groove ball bearing 6000-RS, design RSH: contact seal on one side. Under GOST the same bearing is designated 160100.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 160100?

It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0100 corresponds to the ISO base 6000. Size 10 × 26 × 8 mm, a full equivalent of 6000-RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet