+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6000 RS: ⌀10 × ⌀26 × 8 mm⌀26⌀1086000 RSRS
Fig. 1: 6000 RS, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6000 RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6000 RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 43 approximate
d
10 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
26 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
8 mm
Width BRing width. Source: supplier data
Seal
RSrubber, one side
Clearance
normal clearance
C
4.75 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
1.96 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.019 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 10 × 26 × 8 from other brands

45 products
Cross-section drawing to size: Deep groove ball, 10 × 26 × 8 mm
You are viewingCT 6000 RS

Everything the number specifies matches: series 60, 10 × 26 × 8 mm, contact seal on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Deep groove ball, 10 × 26 × 8 mm6000 RSThis bearingCT10 × 26 × 8available to orderon requestyou are here
  • Cross-section drawing to size: Deep groove ball, 10 × 26 × 8 mm6000-RSHSKF10 × 26 × 8available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 26d 10B 8
d×D×Bsize 10 × 26 × 8mm
Cdynamic 4.75kN
C0static 1.96kN
mweight 0.019kg

Deep groove ball bearing 6000-RS, design RS: contact seal on one side. Under GOST the same bearing is designated 160100.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 160100?

It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0100 corresponds to the ISO base 6000. Size 10 × 26 × 8 mm, a full equivalent of 6000-RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet