+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3208 A-2Z/C3MT33: ⌀40 × ⌀80 × 30.2 mm⌀80⌀4030.23208 A-2Z/C3MT332Z
Fig. 1: 3208 A-2Z/C3MT33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3208 A-2Z/C3MT33

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3208 A-2Z/C3MT33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 21 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
30.2 mm
Width BRing width. Source: supplier data
Seal
2Zmetal shields on both sides
Clearance
C3
C
47.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 40 × 80 × 30.2 from other brands

23 products
Cross-section drawing to size: Angular contact ball, 40 × 80 × 30.2 mm
You are viewingSKF 3208 A-2Z/C3MT33

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Angular contact ball, 40 × 80 × 30.2 mm3208 2RS TNGcontact seals on both sides, normal clearance, TNGCT40 × 80 × 30.2937 pcs€2.97Request a quote
  • Series illustration (not a photo of this item): 3208 2RS3208 2RScontact seals on both sides, normal clearance, standard designCT40 × 80 × 30.2181 pcs€3.59Request a quote
  • Series illustration (not a photo of this item): 3208 2RS P6 BBC-R3208 2RS P6 BBC-Rcontact seals on both sides, normal clearance, precision class P6, standard designBBC-R40 × 80 × 30.2136 pcs€7.30Request a quote
  • Photo: 3208 2RS3208 2RScontact seals on both sides, normal clearance, standard designZ&S40 × 80 × 30.2available to order€10.91Request a quote
  • Photo: 3208 A-2RS1TN9/MT333208 A-2RS1TN9/MT33contact seals on both sides, normal clearance, different cage, A, MT33SKF40 × 80 × 30.2available to order€46.32Request a quote
  • Photo: 3208 A-2RS1TN9/C3MT333208 A-2RS1TN9/C3MT33contact seals on both sides, different cage, A, MT33SKF40 × 80 × 30.2available to order€48.37Request a quote
  • Cross-section drawing to size: Deep groove ball, 40 × 80 × 30.2 mm5208 2RScontact seals on both sides, normal clearance, standard designCT40 × 80 × 30.2available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3208 2RS3208 2RScontact seals on both sides, normal clearance, standard designCX40 × 80 × 30.2out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 3208 2RS3208 2RScontact seals on both sides, normal clearance, standard designKG40 × 80 × 30.2available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball3208B-2RSRTNG N AR3N5contact seals on both sides, 5, A, B, TNG, groove for a snap ring, R3: not decodedNSK40 × 80 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 80d 40B 30.2
d×D×Bsize 40 × 80 × 30.2mm
Cdynamic 47.5kN

Angular contact ball bearing 3208 A-ZZ C3, design 2Z: metal shields on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet