+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 3208 A-2RS1TN9/MT33: ⌀40 × ⌀80 × 30.2 mm⌀80⌀4030.23208 A-2RS1TN9/MT332RS1
Fig. 1: 3208 A-2RS1TN9/MT33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3208 A-2RS1TN9/MT33

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3208 A-2RS1TN9/MT33

€46.32per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 20 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
30.2 mm
Width BRing width. Source: two supplier sources
Seal
2RS1contact seals on both sides
C
48 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
36.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.57 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 40 × 80 × 30.2 from other brands

23 products
Photo: 3208 A-2RS1TN9/MT33
You are viewingSKF 3208 A-2RS1TN9/MT33
€46.32baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€46.32).
02

Details

what this bearing is, questions

About the bearing

D 80d 40B 30.2
d×D×Bsize 40 × 80 × 30.2mm
Cdynamic 48kN
C0static 36.5kN
mweight 0.57kg

Angular contact ball bearing 3208 A-2RS, design 2RS1: contact seals on both sides.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Will 3208 2RS1 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet