+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2314/C3: ⌀70 × ⌀150 × 51 mm⌀150⌀70512314/C3
Fig. 1: 2314/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2314/C3

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2314/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 7 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
51 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
C3
01

Equivalents

the same size 70 × 150 × 51 from other brands

8 products
Series illustration (not a photo of this item): 2314/C3
You are viewingSKF 2314/C3

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 23142314normal clearanceCT70 × 150 × 5116 pcs€12.84Request a quote
  • Photo: 23142314normal clearanceZKL70 × 150 × 51available to order€56.48Request a quote
  • Series illustration (not a photo of this item): 23142314normal clearanceGPZ70 × 150 × 51out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 23142314normal clearanceKG70 × 150 × 51available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23142314normal clearanceSKF70 × 150 × 51available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 70 × 150 × 51 mm1614 DSTNST, groove for a snap ring, D: not decodedNICE70 × 150 × 51available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 70 × 150 × 51 mm1614 2Zmetal shields on both sides, normal clearanceZEN70 × 150 × 51available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 70 × 150 × 51mm

Self-aligning ball bearing 2314 C3.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet