+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 1607 (2307) PQ: ⌀35 × ⌀80 × 31 mm⌀80⌀35311607 (2307) PQ
Fig. 1: 1607 (2307) PQ, simplified drawing per ISO 8826-1; GOST number = ISO 2307, dimensions from the GOST↔ISO table CX p.764. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1607

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 1607

Supplier’s set and note: (2307) PQ

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 4 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
31 mm
Width BRing width. Source: supplier data
01

Equivalents

the same size 35 × 80 × 31 from other brands

15 products
Cross-section drawing to size: Deep groove ball, 35 × 80 × 31 mm
You are viewingNTE 1607

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 2307 K C32307 K C3different designNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 KTNGdifferent designNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 EKTN9different designSKF35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 ETN9/C3different designSKF35 × 80 × 31available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 80d 35B 31
d×D×Bsize 35 × 80 × 31mm

Deep groove ball bearing 1607 (2307) PQ.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet