+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 23032 CC/W33: ⌀160 × ⌀240 × 60 mm⌀240⌀1606023032 CC/W33
Fig. 1: 23032 CC/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 23032 CC/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 23032 CC/W33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 13 approximate
d
160 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
240 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
60 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
585 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 160 × 240 × 60 from other brands

14 products
Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm
You are viewingSKF 23032 CC/W33

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 MBW33MB, lubrication groove and holesCT160 × 240 × 6019 pcs€53.15Request a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE160 × 240 × 602 pcs€134.15Request a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 CW33CW33no brand160 × 240 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 MW33M, lubrication groove and holesno brand160 × 240 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032CAW33CA, lubrication groove and holesDYZV160 × 240 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 E1A-XL-K-ME1A, M, XL, 1:12 tapered boreFAG160 × 240 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 E1A-XL-ME1A, M, XLFAG160 × 240 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 MBW33MB, lubrication groove and holesKG160 × 240 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 MBW33C3clearance C3, MB, lubrication groove and holesKG160 × 240 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 CAW33CA, lubrication groove and holesNTE160 × 240 × 60available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 160 × 240 × 60mm
Cdynamic 585kN

Spherical roller bearing 23032. Under GOST the same bearing is designated 3003132.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3003132?

It is the same bearing under GOST 3189-89: 3003132 corresponds to the ISO base 23032. Size 160 × 240 × 60 mm, a full equivalent of 23032.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet