+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 23032 MBW33: ⌀160 × ⌀240 × 60 mm⌀240⌀1606023032 MBW33
Fig. 1: 23032 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 23032 MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 23032 MBW33

€53.15per piece
In stock: 19 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 10 approximate
d
160 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
240 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
60 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 160 × 240 × 60 from other brands

14 products
Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm
You are viewingCT 23032 MBW33
€53.15baseline for the price comparison

Everything the number specifies matches: series 230, 160 × 240 × 60 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 MBW33This bearingCT160 × 240 × 6019 pcs€53.15you are here
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 MBW33KG160 × 240 × 60available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 160 × 240 × 60 mm23032 MBW33NTE160 × 240 × 60available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€53.15).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 160 × 240 × 60mm

Spherical roller bearing 23032. Under GOST the same bearing is designated 3003132.

Frequently asked questions

What is 3003132?

It is the same bearing under GOST 3189-89: 3003132 corresponds to the ISO base 23032. Size 160 × 240 × 60 mm, a full equivalent of 23032.

Will 23032 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet