+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22313 E: ⌀65 × ⌀140 × 48 mm⌀140⌀654822313 E
Fig. 1: 22313 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22313 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22313 E

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 23 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
48 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
340 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 65 × 140 × 48 from other brands

25 products
Series illustration (not a photo of this item): 22313 E
You are viewingSKF 22313 E

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313 CA/W33CA, lubrication groove and holesCT65 × 140 × 4854 pcs€16.65Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313 CAW33CA, lubrication groove and holesNTE65 × 140 × 485 pcs€25.83Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313 CW33 PQCW33, PQ: not decodedNTE65 × 140 × 483 pcs€42.18Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313 MBW33MB, lubrication groove and holesNTE65 × 140 × 48available to order€28.97Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313 KCW33C, lubrication groove and holes, 1:12 tapered boreno brand65 × 140 × 48available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22313 CW3322313 CW33CW33CT65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313 MBKW33MB, lubrication groove and holes, 1:12 tapered boreCT65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313CAW33CA, lubrication groove and holesDYZV65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313MB/W33MB, lubrication groove and holesDYZV65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313-E1E1FAG65 × 140 × 48available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 48mm
Cdynamic 340kN

Spherical roller bearing 22313.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 22313 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet