+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22313 CAW33: ⌀65 × ⌀140 × 48 mm⌀140⌀654822313 CAW33
Fig. 1: 22313 CAW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22313 CAW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing NTE 22313 CAW33

€25.83per piece
In stock: 5 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 22 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
48 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 65 × 140 × 48 from other brands

25 products
Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm
You are viewingNTE 22313 CAW33
€25.83baseline for the price comparison

Everything the number specifies matches: series 223, 65 × 140 × 48 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313 CAW33This bearingNTE65 × 140 × 485 pcs€25.83you are here
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313 CA/W33CT65 × 140 × 4854 pcs€16.65−€9.18Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 140 × 48 mm22313CAW33DYZV65 × 140 × 48available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€25.83).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 48mm

Spherical roller bearing 22313.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet