+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22312 E: ⌀60 × ⌀130 × 46 mm⌀130⌀604622312 E
Fig. 1: 22312 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22312 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22312 E

€105.08per piece
In stock: 5 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 29 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
46 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
335 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 60 × 130 × 46 from other brands

32 products
Photo: 22312 E
You are viewingSKF 22312 E
€105.08baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 22312 C/W3322312 C/W33C, lubrication groove and holesCT60 × 130 × 46328 pcs€9.49−€95.59Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 130 × 46 mm22312 CA/W33CA, lubrication groove and holesCT60 × 130 × 4678 pcs€12.86−€92.22Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 130 × 46 mm22312 W33 J C3clearance C3, J, lubrication groove and holesNTE60 × 130 × 46316 pcs€16.34−€88.74Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 130 × 46 mm22312 CAW33CA, lubrication groove and holesNTE60 × 130 × 465 pcs€20.92−€84.16Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 130 × 46 mm22312 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE60 × 130 × 4645 pcs€28.05−€77.03Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 130 × 46 mm22312 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE60 × 130 × 4699 pcs€33.85−€71.23Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 130 × 46 mm22312 CW33 PQCW33, PQ: not decodedNTE60 × 130 × 465 pcs€41.14−€63.94Request a quote
  • Photo: 22312 CW33 C322312 CW33 C3clearance C3, CW33FKL60 × 130 × 46available to order€92.14−€12.94Request a quote
  • Series illustration (not a photo of this item): 22312 CW3322312 CW33CW33no brand60 × 130 × 46available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 60 × 130 × 46 mm22312 CAW33C4clearance C4, CA, lubrication groove and holesCT60 × 130 × 46available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€105.08).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 130 × 46mm
C0static 335kN

Spherical roller bearing 22312. Under GOST the same bearing is designated 53612.

C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 53612?

It is the same bearing under GOST 3189-89: 53612 corresponds to the ISO base 22312. Size 60 × 130 × 46 mm, a full equivalent of 22312.

Will 22312 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet