+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22312 C/W33: ⌀60 × ⌀130 × 46 mm⌀130⌀604622312 C/W33
Fig. 1: 22312 C/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22312 C/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22312 C/W33

€9.49per piece
In stock: 328 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
4 exact, 26 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
46 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
238 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 60 × 130 × 46 from other brands

32 products
Series illustration (not a photo of this item): 22312 C/W33
You are viewingCT 22312 C/W33
€9.49baseline for the price comparison

Everything the number specifies matches: series 223, 60 × 130 × 46 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

Under the price: the difference from the price of this bearing (€9.49).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 130 × 46mm
Cdynamic 238kN

Spherical roller bearing 22312. Under GOST the same bearing is designated 53612.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 53612?

It is the same bearing under GOST 3189-89: 53612 corresponds to the ISO base 22312. Size 60 × 130 × 46 mm, a full equivalent of 22312.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet