+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22222 EK: ⌀110 × ⌀200 × 53 mm⌀200⌀1105322222 EK
Fig. 1: 22222 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22222 EK

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22222 EK

€213.88per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 25 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
200 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
53 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
560 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
640 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 110 × 200 × 53 from other brands

26 products
Photo: 22222 EK
You are viewingSKF 22222 EK
€213.88baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 CA/W33 C3clearance C3, CA, lubrication groove and holesCT110 × 200 × 5337 pcs€24.87−€189.01Request a quote
  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 CA/W33CA, lubrication groove and holesCT110 × 200 × 5361 pcs€34.01−€179.87Request a quote
  • Series illustration (not a photo of this item): 22222 CW3322222 CW33CW33NTE110 × 200 × 5310 pcs€47.19−€166.69Request a quote
  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 CAW33CA, lubrication groove and holesNTE110 × 200 × 5310 pcs€53.34−€160.54Request a quote
  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE110 × 200 × 5310 pcs€73.22−€140.66Request a quote
  • Series illustration (not a photo of this item): 22222 C/W3322222 C/W33C, lubrication groove and holesCT110 × 200 × 53available to order€32.23−€181.65Request a quote
  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 MBW33MB, lubrication groove and holesNTE110 × 200 × 53available to order€59.77−€154.11Request a quote
  • Photo: 22222-E22222-EESKF110 × 200 × 53available to order€220.19+€6.31Request a quote
  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT110 × 200 × 53available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 KCW33C, lubrication groove and holes, 1:12 tapered boreCT110 × 200 × 53available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€213.88).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 110 × 200 × 53mm
Cdynamic 560kN
C0static 640kN

Spherical roller bearing 22222 K. Under GOST the same bearing is designated 153522.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 153522?

It is the same bearing under GOST 3189-89: 153522 corresponds to the ISO base 22222 K. Size 110 × 200 × 53 mm, a full equivalent of 22222 K.

Will 22222 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet