+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22222 CAW33: ⌀110 × ⌀200 × 53 mm⌀200⌀1105322222 CAW33
Fig. 1: 22222 CAW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22222 CAW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing NTE 22222 CAW33

€53.34per piece
In stock: 10 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 24 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
200 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
53 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 110 × 200 × 53 from other brands

26 products
Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm
You are viewingNTE 22222 CAW33
€53.34baseline for the price comparison

Everything the number specifies matches: series 222, 110 × 200 × 53 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 CAW33This bearingNTE110 × 200 × 5310 pcs€53.34you are here
  • Cross-section drawing to size: Spherical roller, 110 × 200 × 53 mm22222 CA/W33CT110 × 200 × 5361 pcs€34.01−€19.33Request a quote

Under the price: the difference from the price of this bearing (€53.34).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 110 × 200 × 53mm

Spherical roller bearing 22222. Under GOST the same bearing is designated 53522.

Frequently asked questions

What is 53522?

It is the same bearing under GOST 3189-89: 53522 corresponds to the ISO base 22222. Size 110 × 200 × 53 mm, a full equivalent of 22222.

Will 22222 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet