+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22220 E: ⌀100 × ⌀180 × 46 mm⌀180⌀1004622220 E
Fig. 1: 22220 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22220 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22220 E

€178.93per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 27 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
46 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
425 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
490 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 100 × 180 × 46 from other brands

29 products
Photo: 22220 E
You are viewingSKF 22220 E
€178.93baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 CA/W33CA, lubrication groove and holesCT100 × 180 × 46155 pcs€19.11−€159.82Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 KCA/W33CA, lubrication groove and holes, 1:12 tapered boreCT100 × 180 × 46100 pcs€19.84−€159.09Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 CAW33CA, lubrication groove and holesNTE100 × 180 × 4620 pcs€41.03−€137.90Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE100 × 180 × 4620 pcs€63.85−€115.08Request a quote
  • Photo: 22220 EK22220 EKE, 1:12 tapered boreSKF100 × 180 × 466 pcs€173.97−€4.96Request a quote
  • Photo: 22220 EK/C322220 EK/C3clearance C3, E, 1:12 tapered boreSKF100 × 180 × 465 pcs€179.08+€0.15Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 MW33M, lubrication groove and holesCT100 × 180 × 46available to order€19.84−€159.09Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 MBW33MB, lubrication groove and holesNTE100 × 180 × 46available to order€45.98−€132.95Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 MW33M, lubrication groove and holesno brand100 × 180 × 46available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22220CW3322220CW33CW33CT100 × 180 × 46available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€178.93).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 100 × 180 × 46mm
Cdynamic 425kN
C0static 490kN

Spherical roller bearing 22220. Under GOST the same bearing is designated 53520.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 53520?

It is the same bearing under GOST 3189-89: 53520 corresponds to the ISO base 22220. Size 100 × 180 × 46 mm, a full equivalent of 22220.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet