+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22220 MW33: ⌀100 × ⌀180 × 46 mm⌀180⌀1004622220 MW33
Fig. 1: 22220 MW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22220 MW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22220 MW33

€19.84per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 26 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
46 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 100 × 180 × 46 from other brands

29 products
Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm
You are viewingCT 22220 MW33
€19.84baseline for the price comparison

Everything the number specifies matches: series 222, 100 × 180 × 46 mm, open, no protection, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 MW33This bearingCT100 × 180 × 46available to order€19.84you are here
  • Cross-section drawing to size: Spherical roller, 100 × 180 × 46 mm22220 MW33no brand100 × 180 × 46available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€19.84).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 100 × 180 × 46mm

Spherical roller bearing 22220. Under GOST the same bearing is designated 53520.

Frequently asked questions

What is 53520?

It is the same bearing under GOST 3189-89: 53520 corresponds to the ISO base 22220. Size 100 × 180 × 46 mm, a full equivalent of 22220.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet