+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22218 EK: ⌀90 × ⌀160 × 40 mm⌀160⌀904022218 EK
Fig. 1: 22218 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22218 EK

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22218 EK

€133.53per piece
In stock: 15 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 40 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
40 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
325 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
375 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
3.33 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 90 × 160 × 40 from other brands

41 products
Photo: 22218 EK
You are viewingSKF 22218 EK
€133.53baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 KMBW33+H318MB, lubrication groove and holes, 1:12 tapered bore, H318: not decodedCT90 × 160 × 4055 pcs€24.71−€108.82Request a quote
  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 CAW33CA, lubrication groove and holesNTE90 × 160 × 4020 pcs€28.31−€105.22Request a quote
  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 KMBW33+H318MB, lubrication groove and holes, 1:12 tapered bore, H318: not decodedNTE90 × 160 × 4020 pcs€37.93−€95.60Request a quote
  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218-E1-XL-K-C3clearance C3, E1, XL, 1:12 tapered boreFAG90 × 160 × 4010 pcs€117.48−€16.05Request a quote
  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 RHAW33RHA, lubrication groove and holesKoyo90 × 160 × 407 pcs€127.51−€6.02Request a quote
  • Series illustration (not a photo of this item): 22218 C/W3322218 C/W33C, lubrication groove and holesCT90 × 160 × 40available to order€14.36−€119.17Request a quote
  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 CA/W33CA, lubrication groove and holesCT90 × 160 × 40available to order€18.62−€114.91Request a quote
  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 MBW33MB, lubrication groove and holesNTE90 × 160 × 40available to order€31.74−€101.79Request a quote
  • Photo: 22218 C22218 CCURB90 × 160 × 40available to order€51.44−€82.09Request a quote
  • Photo: 22218 E22218 EESKF90 × 160 × 40available to order€124.13−€9.40Request a quote

Under the price: the difference from the price of this bearing (€133.53).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 160 × 40mm
Cdynamic 325kN
C0static 375kN
mweight 3.33kg

Spherical roller bearing 22218 K. Under GOST the same bearing is designated 153518.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 153518?

It is the same bearing under GOST 3189-89: 153518 corresponds to the ISO base 22218 K. Size 90 × 160 × 40 mm, a full equivalent of 22218 K.

Will 22218 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet