+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22218 CAW33: ⌀90 × ⌀160 × 40 mm⌀160⌀904022218 CAW33
Fig. 1: 22218 CAW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22218 CAW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing NTE 22218 CAW33

€28.31per piece
In stock: 20 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 39 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
40 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 90 × 160 × 40 from other brands

41 products
Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm
You are viewingNTE 22218 CAW33
€28.31baseline for the price comparison

Everything the number specifies matches: series 222, 90 × 160 × 40 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 CAW33This bearingNTE90 × 160 × 4020 pcs€28.31you are here
  • Cross-section drawing to size: Spherical roller, 90 × 160 × 40 mm22218 CA/W33CT90 × 160 × 40available to order€18.62−€9.69Request a quote

Under the price: the difference from the price of this bearing (€28.31).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 160 × 40mm

Spherical roller bearing 22218. Under GOST the same bearing is designated 53518.

Frequently asked questions

What is 53518?

It is the same bearing under GOST 3189-89: 53518 corresponds to the ISO base 22218. Size 90 × 160 × 40 mm, a full equivalent of 22218.

Will 22218 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet