+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22217 EK: ⌀85 × ⌀150 × 36 mm⌀150⌀853622217 EK
Fig. 1: 22217 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22217 EK

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22217 EK

€111.64per piece
In stock: 10 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 24 approximate
d
85 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
36 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
285 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
325 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 85 × 150 × 36 from other brands

26 products
Photo: 22217 EK
You are viewingSKF 22217 EK
€111.64baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217 K CA/W33CA, lubrication groove and holes, 1:12 tapered boreCT85 × 150 × 361 pcs€16.80−€94.84Request a quote
  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217 CA/W33CA, lubrication groove and holesCT85 × 150 × 36107 pcs€18.17−€93.47Request a quote
  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217 CAW33CA, lubrication groove and holesNTE85 × 150 × 3610 pcs€23.59−€88.05Request a quote
  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217 CW33 PQCW33, PQ: not decodedNTE85 × 150 × 3610 pcs€41.77−€69.87Request a quote
  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217 MBW33MB, lubrication groove and holesNTE85 × 150 × 36available to order€26.44−€85.20Request a quote
  • Photo: 2221722217standard designFLT85 × 150 × 36available to order€66.17−€45.47Request a quote
  • Photo: 2221722217standard designFKL85 × 150 × 36available to order€80.62−€31.02Request a quote
  • Photo: 22217 E22217 EESKF85 × 150 × 36available to order€101.04−€10.60Request a quote
  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217 KCAW33CA, lubrication groove and holes, 1:12 tapered boreno brand85 × 150 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217/W33lubrication groove and holesDYZV85 × 150 × 36available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€111.64).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 85 × 150 × 36mm
Cdynamic 285kN
C0static 325kN

Spherical roller bearing 22217 K. Under GOST the same bearing is designated 113517.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 113517?

It is the same bearing under GOST 3189-89: 113517 corresponds to the ISO base 22217 K. Size 85 × 150 × 36 mm, a full equivalent of 22217 K.

Will 22217 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet