+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22217 K CA/W33: ⌀85 × ⌀150 × 36 mm⌀150⌀853622217 K CA/W33
Fig. 1: 22217 K CA/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22217 K CA/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing CT 22217 K CA/W33

€16.80per piece
In stock: 1 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 24 approximate
d
85 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
36 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 85 × 150 × 36 from other brands

26 products
Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm
You are viewingCT 22217 K CA/W33
€16.80baseline for the price comparison

Everything the number specifies matches: series 222, 85 × 150 × 36 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217 K CA/W33This bearingCT85 × 150 × 361 pcs€16.80you are here
  • Cross-section drawing to size: Spherical roller, 85 × 150 × 36 mm22217 KCAW33no brand85 × 150 × 36available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€16.80).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 85 × 150 × 36mm

Spherical roller bearing 22217 K. Under GOST the same bearing is designated 113517.

Frequently asked questions

What is 113517?

It is the same bearing under GOST 3189-89: 113517 corresponds to the ISO base 22217 K. Size 85 × 150 × 36 mm, a full equivalent of 22217 K.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet