+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2211 EKTN9/C3: ⌀55 × ⌀100 × 25 mm⌀100⌀55252211 EKTN9/C3
Fig. 1: 2211 EKTN9/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2211 EKTN9/C3

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2211 EKTN9/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 11 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
25 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
C3
C
39 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 55 × 100 × 25 from other brands

12 products
Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm
You are viewingSKF 2211 EKTN9/C3

Same size, different design: the difference is written in the row.

  • Photo: 2211 TV2211 TVnormal clearance, TVFAG55 × 100 × 25available to order€47.30Request a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 Knormal clearance, 1:12 tapered boreno brand55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 5normal clearance, 5NSK55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211K 5normal clearance, 5, 1:12 tapered boreNSK55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 Knormal clearance, 1:12 tapered boreZKL55 × 100 × 25out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 2211 2RS2211 2RScontact seals on both sides, normal clearance, standard designCT55 × 100 × 2586 pcs€4.45Request a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 K-2RS-TVH-C3contact seals on both sides, TVH, 1:12 tapered boreFAG55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211-2RSTNG N AR3N5contact seals on both sides, TNG, groove for a snap ring, AR3N5: not decodedNSK55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 E-2RS1KTN9/C3contact seals on both sidesSKF55 × 100 × 25available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2211 E-2RS1TN92211 E-2RS1TN9contact seals on both sides, normal clearance, different cage, ESKF55 × 100 × 25available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 100 × 25mm
Cdynamic 39kN

Self-aligning ball bearing 2211 K C3.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet