+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2211 E-2RS1TN9: ⌀55 × ⌀100 × 25 mm⌀100⌀55252211 E-2RS1TN92RS1
Fig. 1: 2211 E-2RS1TN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2211 E-2RS1TN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2211 E-2RS1TN9

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 11 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
25 mm
Width BRing width. Source: supplier data
Seal
2RS1contact seals on both sides
Clearance
normal clearance
01

Equivalents

the same size 55 × 100 × 25 from other brands

12 products
Series illustration (not a photo of this item): 2211 E-2RS1TN9
You are viewingSKF 2211 E-2RS1TN9

Same size, different design: the difference is written in the row.

  • Photo: 2211 TV2211 TVopen, no protection, TVFAG55 × 100 × 25available to order€47.30Request a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 Kopen, no protection, 1:12 tapered boreno brand55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 5open, no protection, 5NSK55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211K 5open, no protection, 5, 1:12 tapered boreNSK55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 EKTN9open, no protection, different cage, E, 1:12 tapered boreSKF55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 EKTN9/C3open, no protection, clearance C3, different cage, E, 1:12 tapered boreSKF55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 Kopen, no protection, 1:12 tapered boreZKL55 × 100 × 25out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 2211 2RS2211 2RSstandard designCT55 × 100 × 2586 pcs€4.45Request a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211 K-2RS-TVH-C3clearance C3, TVH, 1:12 tapered boreFAG55 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 55 × 100 × 25 mm2211-2RSTNG N AR3N5TNG, groove for a snap ring, AR3N5: not decodedNSK55 × 100 × 25available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 100 × 25mm

Self-aligning ball bearing 2211-2RS, design 2RS1: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet