+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2207 ETN9/C3: ⌀35 × ⌀72 × 23 mm⌀72⌀35232207 ETN9/C3
Fig. 1: 2207 ETN9/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2207 ETN9/C3

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2207 ETN9/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 17 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
23 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
C3
C
30.7 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 35 × 72 × 23 from other brands

18 products
Series illustration (not a photo of this item): 2207 ETN9/C3
You are viewingSKF 2207 ETN9/C3

Same size, different design: the difference is written in the row.

  • Photo: 2207 E-2RS1TN92207 E-2RS1TN9contact seals on both sides, normal clearanceSKF35 × 72 × 2310 pcs€30.05Request a quote
  • Series illustration (not a photo of this item): 2207 2RS2207 2RScontact seals on both sides, normal clearance, standard designCT35 × 72 × 23available to order€3.11Request a quote
  • Photo: 2207 2RS2207 2RScontact seals on both sides, normal clearance, standard designZ&S35 × 72 × 23available to order€8.21Request a quote
  • Series illustration (not a photo of this item): 2207 2RS2207 2RScontact seals on both sides, normal clearance, standard designno brand35 × 72 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2207 2RS2207 2RScontact seals on both sides, normal clearance, standard designCX35 × 72 × 23out of stockon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207-2RSTNG N AR3N5contact seals on both sides, TNG, groove for a snap ring, AR3N5: not decodedNSK35 × 72 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 K 2RSTNGcontact seals on both sides, normal clearance, TNG, 1:12 tapered boreNSK35 × 72 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 E-2RS1KTN9contact seals on both sides, normal clearance, different cage, E, 1:12 tapered boreSKF35 × 72 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 E-2RS1KTN9/C3contact seals on both sides, different cage, E, 1:12 tapered boreSKF35 × 72 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mmS 2207 2RScontact seals on both sides, S: not decodedZEN35 × 72 × 23available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 72 × 23mm
Cdynamic 30.7kN

Self-aligning ball bearing 2207 C3.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet