+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 2207 E-2RS1TN9: ⌀35 × ⌀72 × 23 mm⌀72⌀35232207 E-2RS1TN92RS1
Fig. 1: 2207 E-2RS1TN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2207 E-2RS1TN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2207 E-2RS1TN9

€30.05per piece
In stock: 10 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 16 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
2RS1contact seals on both sides
Clearance
normal clearance
C
19 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 35 × 72 × 23 from other brands

18 products
Photo: 2207 E-2RS1TN9
You are viewingSKF 2207 E-2RS1TN9
€30.05baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designCT35 × 72 × 23available to order€3.11−€26.94Request a quote
  • Photo: 2207 2RS2207 2RSstandard designZ&S35 × 72 × 23available to order€8.21−€21.84Request a quote
  • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designno brand35 × 72 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207K+H3071:12 tapered bore, H307: not decodedCT35 × 72 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2207 2RS2207 2RSstandard designCX35 × 72 × 23out of stockon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207-2RSTNG N AR3N5TNG, groove for a snap ring, AR3N5: not decodedNSK35 × 72 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 K 2RSTNGTNG, 1:12 tapered boreNSK35 × 72 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 E-2RS1KTN9different cage, E, 1:12 tapered boreSKF35 × 72 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 72 × 23 mm2207 E-2RS1KTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF35 × 72 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22072207open, no protection, standard designCT35 × 72 × 23312 pcs€2.69−€27.36Request a quote

Under the price: the difference from the price of this bearing (€30.05).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 72 × 23mm
Cdynamic 19kN
C0static 6kN

Self-aligning ball bearing 2207-2RS, design 2RS1: contact seals on both sides.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet