+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 1313 ETN9: ⌀65 × ⌀140 × 33 mm⌀140⌀65331313 ETN9
Fig. 1: 1313 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1313 ETN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1313 ETN9

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 7 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
33 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
65 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 65 × 140 × 33 from other brands

8 products
Series illustration (not a photo of this item): 1313 ETN9
You are viewingSKF 1313 ETN9

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Self-aligning ball, 65 × 140 × 33 mm1313K+H3131:12 tapered bore, H313: not decodedCT65 × 140 × 334 pcs€10.86Request a quote
  • Series illustration (not a photo of this item): 13131313standard designCT65 × 140 × 33available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 65 × 140 × 33 mm1313 TVHTVHFAG65 × 140 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 13131313standard designKG65 × 140 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1313K1313K1:12 tapered boreNSK65 × 140 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1313 EKTN91313 EKTN9different cage, E, 1:12 tapered boreSKF65 × 140 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1313 EKTN9/C31313 EKTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF65 × 140 × 33available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 33mm
Cdynamic 65kN

Self-aligning ball bearing 1313. Under GOST the same bearing is designated 1313.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1313?

It is the same bearing under GOST 3189-89: 1313 corresponds to the ISO base 1313. Size 65 × 140 × 33 mm, a full equivalent of 1313.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet