Self-aligning ball
Bearing CT 1313K
Supplier’s set and note: +H313
€10.86per piece
In stock: 4 pcs
Specifications
- Manufacturer number
- Equivalents
- 1 exact, 5 approximate
- d
- 65 mm Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
- D
- 140 mm Outside diameter DOutside diameter = housing bore. Source: two supplier sources
- B
- 33 mm Width BRing width. Source: two supplier sources
- Outer ring width C
- 33 mm Outer ring width CWidth of the outer ring. Source: supplier data
- Shaft diameter under the sleeve
- 60 mm Shaft diameter under the sleeveSource: Z&S Adapter p.3
- Adapter sleeve length Ls
- 50 mm Adapter sleeve length LsSource: Z&S Adapter p.3
- Nut outside diameter Dn
- 85 mm Nut outside diameter DnSource: Z&S Adapter p.3
- Nut width Cn
- 15 mm Nut width CnSource: Z&S Adapter p.3
- C
- 61.8 kN Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
