+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 1202 ETN9: ⌀15 × ⌀35 × 11 mm⌀35⌀15111202 ETN9
Fig. 1: 1202 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1202 ETN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1202 ETN9

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 6 approximate
d
15 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
11 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
7.41 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
1.76 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 15 × 35 × 11 from other brands

8 products
Photo: 1202 ETN9
You are viewingSKF 1202 ETN9

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 12021202standard designCT15 × 35 × 11available to order€0.86Request a quote
  • Series illustration (not a photo of this item): 12021202standard designno brand15 × 35 × 11available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 12021202standard designKG15 × 35 × 11available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 12021202standard designNACHI15 × 35 × 11available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 15 × 35 × 11 mm1202TNG N 55, TNG, groove for a snap ringNSK15 × 35 × 11available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 12021202standard designNTE15 × 35 × 11available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 15 × 35 × 11mm
Cdynamic 7.41kN
C0static 1.76kN

Self-aligning ball bearing 1202. Under GOST the same bearing is designated 1202.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1202?

It is the same bearing under GOST 3189-89: 1202 corresponds to the ISO base 1202. Size 15 × 35 × 11 mm, a full equivalent of 1202.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet