+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
KG
Drawing of 1202: ⌀15 × ⌀35 × 11 mm⌀35⌀15111202
Fig. 1: 1202, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1202

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing KG 1202

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
5 exact, 2 approximate
d
15 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
11 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 15 × 35 × 11 from other brands

8 products
Series illustration (not a photo of this item): 1202
You are viewingKG 1202

Everything the number specifies matches: series 12, 15 × 35 × 11 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

  • Series illustration (not a photo of this item): 12021202This bearingKG15 × 35 × 11available to orderon requestyou are here
  • Series illustration (not a photo of this item): 12021202CT15 × 35 × 11available to order€0.86Request a quote
  • Series illustration (not a photo of this item): 12021202no brand15 × 35 × 11available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 12021202NACHI15 × 35 × 11available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 12021202NTE15 × 35 × 11available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 15 × 35 × 11mm

Self-aligning ball bearing 1202. Under GOST the same bearing is designated 1202.

Frequently asked questions

What is 1202?

It is the same bearing under GOST 3189-89: 1202 corresponds to the ISO base 1202. Size 15 × 35 × 11 mm, a full equivalent of 1202.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet