+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
PRETIS
Drawing of NU 310: ⌀50 × ⌀110 × 27 mm⌀110⌀5027NU 310
Fig. 1: NU 310, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 310

Load: radial high; no axial loadCylindrical roller NU

Bearing PRETIS NU 310

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
10 exact, 33 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
27 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.01 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 110 × 27 from other brands

44 products
Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 27 mm
You are viewingPRETIS NU 310

Size and design match across the brand catalogues. The codes in the number are read against the PRETIS catalogue.

  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 27 mmNU 310This bearingPRETIS50 × 110 × 27out of stockon requestyou are here
  • Series illustration (not a photo of this item): NU 310 ENU 310 ECT50 × 110 × 2724 pcs€6.60Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 27 mmNU 310 MCT50 × 110 × 2734 pcs€10.07Request a quote
  • Photo: NU 310NU 310UTL50 × 110 × 27available to order€46.06Request a quote
  • Series illustration (not a photo of this item): NU 310 E TVP2NU 310 E TVP2FAG50 × 110 × 27available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 27 mmNU310ET *5NSK50 × 110 × 27available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 27 mmNU310EWNSK50 × 110 × 27available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU310ENU310ENTE50 × 110 × 27available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 310 ECPNU 310 ECPSKF50 × 110 × 27available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 27 mmNU 310URB50 × 110 × 27out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 110 × 27mm
mweight 1.01kg

Cylindrical roller NU bearing NU 310.

M: PRETIS data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 310 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet