+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NU 310 E TVP2: ⌀50 × ⌀110 × 27 mm⌀110⌀5027NU 310 E TVP2
Fig. 1: NU 310 E TVP2, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 310-E-TVP2

Load: radial high; no axial loadCylindrical roller NU

Bearing FAG NU 310-E-TVP2

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 38 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
27 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 50 × 110 × 27 from other brands

44 products
Series illustration (not a photo of this item): NU 310 E TVP2
You are viewingFAG NU 310-E-TVP2

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller, 50 × 110 × 27 mmNF 310different designCT50 × 110 × 2790 pcs€5.40Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 50 × 110 × 27 mmN 310different designCT50 × 110 × 27615 pcs€5.76Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 27 mmNU 310 MMCT50 × 110 × 2734 pcs€10.07Request a quote
  • Cross-section drawing to size: Cylindrical roller, 50 × 110 × 27 mmNF310J PQJ, PQ: not decodedNTE50 × 110 × 2747 pcs€11.69Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 50 × 110 × 27 mmNJ310J PQJ, PQ: not decodedNTE50 × 110 × 2738 pcs€11.69Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 50 × 110 × 27 mmNU310J PQJ, PQ: not decodedNTE50 × 110 × 2728 pcs€11.69Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 50 × 110 × 27 mmNJ 310different designCT50 × 110 × 27available to order€5.90Request a quote
  • Photo: NF 310NF 310different designZ&S50 × 110 × 27available to order€10.78Request a quote
  • Photo: NJ 310 ENJ 310 EEZ&S50 × 110 × 27available to order€16.72Request a quote
  • Photo: NUP 310 ENUP 310 EEZ&S50 × 110 × 27available to order€19.01Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 110 × 27mm

Cylindrical roller NU bearing NU 310 E TVP2.

Frequently asked questions

Will 310 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet