+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6216 LLU/5K: ⌀80 × ⌀140 × 26 mm6216 LLU/5KLLU
Fig. 1: 6216 LLU/5K, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6216 LLU/5K

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTN 6216 LLU/5K

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 22 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
26 mm
Width BRing width. Source: supplier data
Seal
LLUcontact seals on both sides
Clearance
normal clearance
01

Equivalents

the same size 80 × 140 × 26 from other brands

23 products
Drawing: 6216 LLU/5K
You are viewingNTN 6216 LLU/5K

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 62166216open, no protection, standard designCT80 × 140 × 2645 pcs€4.92Request a quote
  • Series illustration (not a photo of this item): 62166216open, no protection, standard designNTE80 × 140 × 2649 pcs€7.29Request a quote
  • Series illustration (not a photo of this item): 62166216open, no protection, standard designno brand80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62166216open, no protection, standard designFAG80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62166216open, no protection, standard designKG80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6216 NR6216 NRopen, no protection, groove and snap ringNSK80 × 140 × 26available to orderon requestRequest a quote
  • Drawing: 6216/C3VL02416216/C3VL0241open, no protection, clearance C3, VL0241SKF80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6216 NR6216 NRopen, no protection, groove and snap ringSKF80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6216 P56216 P5open, no protection, precision class P5, standard designSLF80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6216 ZZ6216 ZZmetal shields on both sides, standard designCT80 × 140 × 26326 pcs€5.13Request a quote
02

Details

what this bearing is, questions

About the bearing

D 140d 80B 26
d×D×Bsize 80 × 140 × 26mm

Deep groove ball bearing 6216-2RS, design LLU: contact seals on both sides. Under GOST the same bearing is designated 180216.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180216?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0216 corresponds to the ISO base 6216. Size 80 × 140 × 26 mm, a full equivalent of 6216-2RS.

Will 6216 LLU C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet