+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6216 NR: ⌀80 × ⌀140 × 26 mm⌀140⌀80266216 NR
Fig. 1: 6216 NR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6216 NR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6216 NR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 21 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
26 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 80 × 140 × 26 from other brands

23 products
Series illustration (not a photo of this item): 6216 NR
You are viewingNSK 6216 NR

Everything the number specifies matches: series 62, 80 × 140 × 26 mm, open, no protection, NR, normal clearance, special design. The codes in the number are read against the NSK catalogue.

  • Series illustration (not a photo of this item): 6216 NR6216 NRThis bearingNSK80 × 140 × 26available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6216 NR6216 NRSKF80 × 140 × 26available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 140d 80B 26
d×D×Bsize 80 × 140 × 26mm

Deep groove ball bearing 6216. Under GOST the same bearing is designated 216.

Frequently asked questions

What is 216?

It is the same bearing under GOST 3189-89: 216 corresponds to the ISO base 6216. Size 80 × 140 × 26 mm, a full equivalent of 6216.

Will 6216 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet