+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NU218E: ⌀90 × ⌀160 × 30 mm⌀160⌀9030NU218E
Fig. 1: NU218E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 218 E

Load: radial high; no axial loadCylindrical roller NU

Bearing NTE NU 218 E

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 15 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
30 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
208 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
220 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
2.35 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 90 × 160 × 30 from other brands

17 products
Series illustration (not a photo of this item): NU218E
You are viewingNTE NU 218 E

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NJ, 90 × 160 × 30 mmNJ 218different designCT90 × 160 × 3010 pcs€12.01Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 90 × 160 × 30 mmNJ218J PQJ, PQ: not decodedNTE90 × 160 × 3020 pcs€21.24Request a quote
  • Photo: NJ 218NJ 218different designGPZ90 × 160 × 30available to order€50.99Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 90 × 160 × 30 mmN218different designCT90 × 160 × 30available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 90 × 160 × 30 mmNF 218 Edifferent designCT90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 218 E TVP2NU 218 E TVP2E, TVP2FAG90 × 160 × 30available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNU 218 E-XL-M1-F1-J20AA-C3clearance C3, E, M1, XL, F1, J20AA: not decodedFAG90 × 160 × ?available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNU 218-E-XL-N-MPAX-F59-C3clearance C3, E, MPA, XL, X, groove for a snap ring, F59: not decodedFAG90 × 160 × ?available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNU218-E-MA6-C3clearance C3, E, MA, 6: not decodedNKE90 × 160 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 90 × 160 × 30 mmN218different designNTE90 × 160 × 30available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 160 × 30mm
Cdynamic 208kN
C0static 220kN
mweight 2.35kg

Cylindrical roller NU bearing NU218E.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 218 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet