+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
GPZ
Drawing of NJ 218: ⌀90 × ⌀160 × 30 mm⌀160⌀9030NJ 218
Fig. 1: NJ 218, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 218

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing GPZ NJ 218

€50.99per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
3 exact, 13 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
30 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
2.41 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 90 × 160 × 30 from other brands

17 products
Photo: NJ 218
You are viewingGPZ NJ 218
€50.99baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the GPZ catalogue.

  • Photo: NJ 218NJ 218This bearingGPZ90 × 160 × 30available to order€50.99you are here
  • Cross-section drawing to size: Cylindrical roller NJ, 90 × 160 × 30 mmNJ 218CT90 × 160 × 3010 pcs€12.01−€38.98Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 90 × 160 × 30 mmNJ 218NTE90 × 160 × 30available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€50.99).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 160 × 30mm
mweight 2.41kg

Cylindrical roller NJ bearing NJ 218.

M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 218 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet