+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 160703: ⌀17 × ⌀62 × 20 mm⌀62⌀1720160703RS
Fig. 1: 160703, simplified drawing per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.764. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 160703

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 160703

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 0 approximate
d
17 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
20 mm
Width BRing width. Source: supplier data
Seal
contact seal on one side
Clearance
normal clearance
01

Equivalents

the same size 17 × 62 × 20 from other brands

3 products
Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm
You are viewingNTE 160703

Everything the number specifies matches: series 1607, 17 × 62 × 20 mm, contact seal on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

  • Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm160703This bearingNTE17 × 62 × 20available to orderon requestyou are here
  • Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm160703CT17 × 62 × 2049 pcs€2.03Request a quote
02

Details

what this bearing is, questions

About the bearing

D 62d 17B 20
d×D×Bsize 17 × 62 × 20mm

Deep groove ball bearing 160703, design : contact seal on one side.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet