+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 160703: ⌀17 × ⌀62 × 20 mm⌀62⌀1720160703RS
Fig. 1: 160703, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 160703

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 160703

€2.03per piece
In stock: 49 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 0 approximate
d
17 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20 mm
Width BRing width. Source: two supplier sources
Seal
contact seal on one side
Clearance
normal clearance
01

Equivalents

the same size 17 × 62 × 20 from other brands

3 products
Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm
You are viewingCT 160703
€2.03baseline for the price comparison

Everything the number specifies matches: series 1607, 17 × 62 × 20 mm, contact seal on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm160703This bearingCT17 × 62 × 2049 pcs€2.03you are here
  • Cross-section drawing to size: Deep groove ball, 17 × 62 × 20 mm160703NTE17 × 62 × 20available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€2.03).
02

Details

what this bearing is, questions

About the bearing

D 62d 17B 20
d×D×Bsize 17 × 62 × 20mm

Deep groove ball bearing 160703, design : contact seal on one side.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet