+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6315DDUCM AS2S5: ⌀75 × ⌀160 × 37 mm6315DDUCM AS2S5DDU
Fig. 1: 6315DDUCM AS2S5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6315DDUCM AS2S5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6315DDUCM AS2S5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 22 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
37 mm
Width BRing width. Source: supplier data
Seal
DDUcontact seals on both sides
Clearance
CM
01

Equivalents

the same size 75 × 160 × 37 from other brands

23 products
Drawing: 6315DDUCM AS2S5
You are viewingNSK 6315DDUCM AS2S5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 63156315open, no protection, normal clearance, standard designCT75 × 160 × 3710 pcs€6.72Request a quote
  • Series illustration (not a photo of this item): 63156315open, no protection, normal clearance, standard designNTE75 × 160 × 3728 pcs€14.77Request a quote
  • Photo: 6315/C36315/C3open, no protection, clearance C3, standard designSKF75 × 160 × 37available to order€55.96Request a quote
  • Series illustration (not a photo of this item): 6315N6315Nopen, no protection, normal clearance, groove for a snap ringCT75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63156315open, no protection, normal clearance, standard designDYZV75 × 160 × 37available to orderon requestRequest a quote
  • Drawing: 6315 M6315 Mopen, no protection, normal clearance, MFAG75 × 160 × 37available to orderon requestRequest a quote
  • Drawing: 6315 M-C36315 M-C3open, no protection, clearance C3, MFAG75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63156315open, no protection, normal clearance, standard designKG75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6315 MC36315 MC3open, no protection, clearance MC3, standard designNSK75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6315 2RS6315 2RSnormal clearance, standard designCT75 × 160 × 37157 pcs€10.11Request a quote
02

Details

what this bearing is, questions

About the bearing

D 160d 75B 37
d×D×Bsize 75 × 160 × 37mm

Deep groove ball bearing 6315-2RS, design DDU: contact seals on both sides. Under GOST the same bearing is designated 180315.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180315?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0315 corresponds to the ISO base 6315. Size 75 × 160 × 37 mm, a full equivalent of 6315-2RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet