+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6315 M: ⌀75 × ⌀160 × 37 mm6315 M
Fig. 1: 6315 M, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6315-M

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG 6315-M

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 21 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
37 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 75 × 160 × 37 from other brands

23 products
Drawing: 6315 M
You are viewingFAG 6315-M

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6315 2RS6315 2RScontact seals on both sides, standard designCT75 × 160 × 37157 pcs€10.11Request a quote
  • Photo: 6315 2RS6315 2RScontact seals on both sides, standard designZ&S75 × 160 × 37available to order€22.88Request a quote
  • Series illustration (not a photo of this item): 6315-2RS6315-2RScontact seals on both sides, standard designDYZV75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6315-2RS/C36315-2RS/C3contact seals on both sides, clearance C3, standard designDYZV75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6315 2RS6315 2RScontact seals on both sides, standard designKG75 × 160 × 37available to orderon requestRequest a quote
  • Drawing: 6315DDUCM AS2S56315DDUCM AS2S5contact seals on both sides, clearance CM, 5, AS2SNSK75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6315-2RS16315-2RS1contact seals on both sides, standard designSKF75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6315 2RS1/C36315 2RS1/C3contact seals on both sides, clearance C3, standard designSKF75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63156315standard designCT75 × 160 × 3710 pcs€6.72Request a quote
  • Series illustration (not a photo of this item): 63156315standard designNTE75 × 160 × 3728 pcs€14.77Request a quote
02

Details

what this bearing is, questions

About the bearing

D 160d 75B 37
d×D×Bsize 75 × 160 × 37mm

Deep groove ball bearing 6315. Under GOST the same bearing is designated 315.

Frequently asked questions

What is 315?

It is the same bearing under GOST 3189-89: 315 corresponds to the ISO base 6315. Size 75 × 160 × 37 mm, a full equivalent of 6315.

Will 6315 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet