+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6218ZZCM AS2S5: ⌀90 × ⌀160 × 30 mm6218ZZCM AS2S5ZZ
Fig. 1: 6218ZZCM AS2S5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6218ZZCM AS2S5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6218ZZCM AS2S5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 33 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
30 mm
Width BRing width. Source: supplier data
Seal
ZZshields, both sides
Clearance
CM
01

Equivalents

the same size 90 × 160 × 30 from other brands

35 products
Drawing: 6218ZZCM AS2S5
You are viewingNSK 6218ZZCM AS2S5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 62186218open, no protection, normal clearance, standard designCT90 × 160 × 30120 pcs€8.15Request a quote
  • Series illustration (not a photo of this item): 62186218open, no protection, normal clearance, standard designNTE90 × 160 × 3020 pcs€10.83Request a quote
  • Photo: 6218 N C36218 N C3open, no protection, clearance C3, groove for a snap ringZ&S90 × 160 × 30available to order€31.27Request a quote
  • Photo: 62186218open, no protection, normal clearance, standard designFAG90 × 160 × 30available to order€78.98Request a quote
  • Series illustration (not a photo of this item): 62186218open, no protection, normal clearance, standard designno brand90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6218N6218Nopen, no protection, normal clearance, groove for a snap ringCT90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62186218open, no protection, normal clearance, standard designDYZV90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6218/C46218/C4open, no protection, clearance C4, standard designFAG90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62186218open, no protection, normal clearance, standard designKG90 × 160 × 30available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6218 N6218 Nopen, no protection, normal clearance, groove for a snap ringKG90 × 160 × 30available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 160d 90B 30
d×D×Bsize 90 × 160 × 30mm

Deep groove ball bearing 6218-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80218.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80218?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0218 corresponds to the ISO base 6218. Size 90 × 160 × 30 mm, a full equivalent of 6218-ZZ.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet