+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6210ZZCM D EEMS5: ⌀50 × ⌀90 × 20 mm⌀90⌀50206210ZZCM D EEMS5D
Fig. 1: 6210ZZCM D EEMS5, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6210ZZCM D EEMS5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6210ZZCM D EEMS5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 76 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
20 mm
Width BRing width. Source: supplier data
Seal
Dcontact seal on one side
Clearance
CM
01

Equivalents

the same size 50 × 90 × 20 from other brands

77 products
Cross-section drawing to size: Deep groove ball, 50 × 90 × 20 mm
You are viewingNSK 6210ZZCM D EEMS5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6210 N6210 Nopen, no protection, normal clearance, groove for a snap ringCT50 × 90 × 20224 pcs€1.79Request a quote
  • Series illustration (not a photo of this item): 62106210open, no protection, normal clearance, standard designCT50 × 90 × 201,083 pcs€2.04Request a quote
  • Series illustration (not a photo of this item): 62106210open, no protection, normal clearance, standard designKG50 × 90 × 208 pcs€2.79Request a quote
  • Series illustration (not a photo of this item): 62106210open, no protection, normal clearance, standard designKoyo50 × 90 × 2020 pcs€9.63Request a quote
  • Series illustration (not a photo of this item): 6210 NR6210 NRopen, no protection, normal clearance, groove and snap ringCT50 × 90 × 20available to order€1.67Request a quote
  • Photo: 6210 NR6210 NRopen, no protection, normal clearance, groove and snap ringZ&S50 × 90 × 20available to order€6.73Request a quote
  • Photo: 6210 NR C36210 NR C3open, no protection, clearance C3, groove and snap ringZ&S50 × 90 × 20available to order€7.96Request a quote
  • Photo: 6210 N6210 Nopen, no protection, normal clearance, groove for a snap ringZ&S50 × 90 × 20available to order€8.01Request a quote
  • Photo: 6210/C36210/C3open, no protection, clearance C3, standard designSKF50 × 90 × 20available to order€9.92Request a quote
  • Photo: 62106210open, no protection, normal clearance, standard designSKF50 × 90 × 20available to order€10.01Request a quote
02

Details

what this bearing is, questions

About the bearing

D 90d 50B 20
d×D×Bsize 50 × 90 × 20mm

Deep groove ball bearing 6210-RS, design D: contact seal on one side. Under GOST the same bearing is designated 160210.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 160210?

It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0210 corresponds to the ISO base 6210. Size 50 × 90 × 20 mm, a full equivalent of 6210-RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet